Tuesday, July 26, 2011

Christmas Tree Word Art

Here is a fun project to do for Super Saturday.  I just want to thank my sister-in-law Karen for making this graphic and letting us have it.  You are awesome!  This fun graphic was put on a board to hang, but you can put it on a tile, glass block, tin, wood...

NOTE:  When you order any vinyl that you wish to put on a board to hang, please make a note to us under "Special Instructions" so that we will know to cut the graphic a little shorter to allow for the holes and hanging otherwise the graphic may be too large.

 This is an 8x8 MDF board that is 1/4 inch thick.  You can cut your own board, or you can purchase MDF boards through our website vinylgiftsandmore.com.

 Apply the vinyl to the board.  The nice thing about our vinyl is that we use a clear transfer tape so you can see your graphic through the tape and that way you can see where to place it on your board.  (Note:  We off-set the graphic to allow for hanging but you can center the graphic for your 8"x8" wood to use with an easel.)

 Measure your holes (double check your measurements, or you will end up with 3 holes like me. :) and use a drill to drill your holes.  I put my holes 2 inches from the ends.
Tape the ends of your ribbon so you can put them through the holes. Tie a bow and hang. 
Come check out all of our vinyl at vinylgiftsandmore.com

No comments:

LinkWithin

Related Posts with Thumbnails